products

Wireless CPE - NC2100 Series

The 2100 Series Wireless CPE brings a new level of service and features to the point of wireless service delivery. Blio CPE units are built for solid reliability and easy management.



CPE

NC2101 Wireless CPE

What sets the NC2101 apart is its end-to-end QoS model, its cost effectiveness and ease of installation. Our challenge was to design a device which allowed our clients to build networks that would match or better the service delivered by their competitor's copper based networks.

Read more about the ideas behind the real world solutions our clients and partners are rolling out with Blio CPE devices.

Overview :

  • 266Mhz CPU
  • 64MB Memory
  • 64MB Compact Flash
  • One 10/100Mbps Full Duplex Ethernet Port
  • One 802.11a/b/g Wireless Lan interface
    Up to 54Mbps at 2.4Ghz or 5.8Ghz
  • Supports Power Over Ethernet
  • Integrated 20 dBi antenna for 5.1 to 5.85 GHz
  • Rugged environmentally hardened enclosure
  • No moving parts


Features :

  • Easy to Install
  • Weatherproof box for outdoor use.
  • Easy to Install
  • Low Power
  • Cost Effective
  • Standards Compliant
  • Insignificant RF cable losses
  • Aesthetically pleasing
  • Web Interface for Client and Network Administrator


Hardware Specifications :

Processor and Memory

  • 266 MHz National Geode SC1100 CPU
  • 64 MB SDRAM

Storage

  • 128MB CompactFlash Card

Power

  • 5Watt with 12V DC jack or Power over Ethernet
  • Acceptable range +7V to +18V DC

Management

  • Watchdog timer
  • LM77 Thermal Sensor
  • System Stop on excessive temperature

Connectivity

  • 1 miniPCI Atheros 802.11 Wi-Fi Radio
  • 1 10/100BASE-T Full Duplex LAN Port
  • 9 Pin Async Serial Port
  • Integrated 20 dBi antenna

Environmental Requirements

  • Operating temperature: -10 deg C to 50 deg C
  • Storage temperature: -25 deg C to +70 deg C
  • Relative humidity: 0% to 90% noncondensing

Size and Weight

  • Height: 364mm
  • Width: 258.5mm
  • Depth: 98mm
  • Weight: 2.35kg
  • Clamp: 40 - 50 mm pole
  • Tilt angle:±30 elevation tilt mounted horizontally
    ±25 elevation tilt mounted vertically

 



Antenna Specifications :

  • Gain (max): 20 dBi (0.7 dB)
  • Gain (min over the band): 18 dBi (0.7 dB)
  • Frequency: 5.1 - 5.85 GHz
  • E-plane: 3 dB beamwidth 11 ( 1)
  • H-plane: 3 dB beamwidth 16 ( 1)
  • Feed power handling: 10 W
  • Nominal input impedance: 50 ohm
  • Polarisation: Linear (vertical or horizontal)

 


Software Specifications :

Management

  • Web Interface with End User Mode and Advanced User Mode
  • Supports DNS, NTP, Syslog Configuration
  • Routing Table Configuration
  • SNMP v2 Support
  • Field Upgradable with Remote Upgrade Server

Connectivity

  • VPN Client, 256bit SSL AES with CBC Encryptiont
  • Flexible MTU Setting

Client LAN Services

  • DHCP for DNS, Syslog
  • Network Address Translation
  • Port Forwarding

 

product navigation
network appliances
  • Wireless CPE
security systems
security systems